MVCX815 Magnetic Vent Covers (8″ X 15″, 3-pk))
May 15, 2010 by admin
Filed under Vent Covers
Product Description
Buy MVCX815 Magnetic Vent Covers (8″ X 15″, 3-pk)) at Amazon
AF410A AirFlow Breeze, Quiet Register Booster Fan, Almond Color 4″ x 10″ opening
January 3, 2010 by admin
Filed under Featured, Floor Vents
Product Description
Give Your Heating and Cooling System a Boost!
Increase your comfort, and save money too!
If you have a room that doesnt get its fair share of warm or cool air from your heating / air conditioning system, the AirFlow Breeze could be your solution. Once you set your target comfort level, the built-in temperature sensor takes over. It will direct the powerful, yet quite fan to pull extra warm or cool air out of weak registers, increasing air flow, and delivering the comfort you demand.
Technical Specs
Size: The AirFlow Breeze is 4 x 10 to fit most standard vent openings,
Material: Flame-retardant plastic,
Power Requirements: 115 VAC converted to 12VDC 500mA (adapter included),
Includes six (6) foot power cord in a matching color,
Power Consumption: 8 Watts,
Fan Speed: The AirFlow Breeze has three fan settings,
Fast Speed 100 cubic feet per minute (cfm),
Medium Speed 70 cubic feet per minute (cfm),
Slow Speed 40 cubic feet per minute (cfm),
Temperature setting range: Heat Off Cool,
UL approval: UL-507 USA and Canada,
Covered by a one year limited warranty from date of purchase,
Comes complete, easy to read instructions.
Buy AF410A AirFlow Breeze, Quiet Register Booster Fan, Almond Color 4″ x 10″ opening at Amazon
MaxxAir Fan Mate Cover
December 10, 2009 by admin
Filed under Vent Covers
The Fan Mate Vent is designed to be used over high powered ceiling fans. The large, screened, louvered opening allows high volume air flow.
Using An Attic Vent Fan to Improve Air Circulation
December 8, 2009 by admin
Filed under Attic Vents
Any homeowner with an attic knows there are certain challenges to maintaining the space under the roof. Attics are notorious for being the perfect place for mold, mildew, roof rot and other structural problems to occur. In addition to making sure the area is properly ventilated, there is also the need to make sure air circulates around and out of the space. This is where an attic vent fan comes into play.
Attic fans are relatively easy to install. If the existing wiring is up to code to support the power the fan will pull, the hardest part of the job is over. The attic vent fan should be situated as an insert or at least near a vented area. The idea is to create airflow from the outside that will be pulled in and distributed throughout the space by the blade action of the attic vent fan. In order to allow for easy airflow out of the attic space, it is important to make sure you have sufficient venting. Just as your attic fan needs an open vent to pull fresh cooler air into the attic, there has to be a way for the hot air to escape from the space. Make sure that more or less opposite of your attic vent fan you have some type of vent to allow that escape, whether it be unobstructed ridge vents or even soffit vents (located under the eaves) that are not blocked with insulation.
An alternative is to install an attic vent fan that is manufactured for roof mounting. This works especially well if you have a shingled roof and have plastic roof ridge vents. With this type of fan, you would mount it as close to the peak of your roof as possible and as close to opposite the vents that will act as the avenues for the hot air to escape the space.
Attic fans can help keep down the temperature in your attic, as well as help prevent the mold and mildew that often accompany areas with little to no air flow. For suggestions of which type and size attic vent fan is right for your home, check out your options at your local home store.
Scott Byers is the owner of Vent Info, a complete attic vent resource with articles on attic vents that you need to read.
6″ Deflecto Vent Cover w/ Grid
December 1, 2009 by admin
Filed under Vent Covers
Heavy Duty Plastic;Bird Proof Louvered Vent Cover;Keep Birds Out Without Restricting Air Flow;Sized For Universal Dryer Vents Or Stove Vents
4″ Deflecto Vent Cover
November 28, 2009 by admin
Filed under Vent Covers
Heavy Duty Plastic, Bird Proof Louvered Vent Cover, Keep Birds Out Without Restricting Air Flow;Sized For Universal Dryer Vents Or Stove Vents. Best price and quality on Amazon
AIR Vent INC 81202 Attic Aluminum Louver 12″ X 12″ White
November 16, 2009 by admin
Filed under Attic Vents
12″ x 12″, White, Attic Aluminum Louver, With Screen, 39.6 SQIN Net Free Area, Riveted Construction, Improves Air Flow, Design Keeps Out Insects & Weather Inflitration, Reversible, Use In Either Flush Or Recessed Applications.
Air Vent #81134 14×24 Mill Aluminum Louver
November 13, 2009 by admin
Filed under Gable Wall Vents
14″ x 24″, Mill Finish Aluminum, Reversible, Louver, 93 SQIN Net Free Area, Riveted Construction, Improves Air Flow, Design Keeps Insects & Weather Infiltration, Reversible, Use In Either Flush Or Recessed Applications.
RPS VC1 3 Pack 8″ x 15″ Magnetic Vent Cover
November 1, 2009 by admin
Filed under Vent Covers
These Magnetic Vent Covers by Bond Helman help control the flow of air from heaters and air conditioners. Use the covers in the winter to keep rooms cozy warm and in the summer to stay comfortably cool.Simply place these covers over the registers in the rooms that are not in use and redirect the air flow to the rooms you are using. The result? Your forced air system will run more efficiently and cost effectively! To hide registers, these flexible oversized vent covers can be cut (more…)