Helm Chair Cover Soft White Vinyl w/ Vents

Buy Helm Chair Cover Soft White Vinyl w/ Vents at Amazon

Gable Vents | Return Air Vents

patterncut.com Custom, decorative gable vents, return air vents, ceiling, wall and floor vent covers

Hawker Genesis vents

Opening the vent covers of a Genesis battery

Why Vents are Important in Improving Indoor Air Quality

It is important to have good indoor air quality. Because we are indoors a great deal — at home and at work — it is important to make sure that the indoor air we are breathing is as healthy as possible. The truth of the matter is that in some cases, the air we breathe indoors is worse than what we breathe outdoors. This is because the air inside is constantly re-circulated, and because it is in a confined space. Outdoors, the air is more dilute, and the particles not so concentrated (except in high pollution areas).

Vents are often collection places for particles that can aggravate allergies and asthma and that can cause other respiratory irritations. Not only do vents collect dust, dander, and hair of all sorts, they then release them into the air. Whether through the heating processing or by forced air conditioning, all the little particles are expelled into the air to float around and eventually be inhaled by members of the household. In order to avoid this, it is possible to use air filters. There are HEPA filters that are made from a special fabric that traps particles and prevents them from getting into the air. There are even filters that can prevent mold spores from spreading through the air and trap the particles that cause odors. These special filters can be placed in the vents, and also at the source of the blowing air in order to prevent particles from circulating through the house.

Another culprit of bad indoor air is the vacuum. So often what is vacuumed up is re-circulated in the process. Small particles are blown back into the air as one vacuums the floor. The number of particles in the air can be significantly reduced by using a vacuum specially fitted with a HEPA filter. Some vacuums also have special bags that are made from HEPA material that prevents even the smallest particles from drifting out of the bag. Multiple filters only help the vacuum more effectively trap irritating and potentially unhealthy particles.

Furniture is an ideal gathering place for all sorts of small particles. And, every time you sit down or your children or pets hop up onto the piece of furniture, the small particles are released into the air, waiting to be inhaled. You can reduce this occurrence by vacuuming your furniture using your upholstery attachment. By doing this every month or so, you can help keep the allergen in the air of your home to a minimum. And if your vacuum has a HEPA filter on it, so much the better. What you get off your furniture will not simply re-circulate through the air as you are vacuuming. Make sure you lift up any cushions and vacuum the undersides.

Keeping your respiratory system healthy can be hard work, especially if you have allergies or asthma. However, you can go a long way toward keeping the air indoors clean with the help of filters on your vents and vacuums.

Fix your own attic vents add 1/8 or smaller screen

attic vent screen

Fancy Vents Talk of the Town

FancyVents, cold air return vent covers, are custom designed and hand-crafted of ornamental iron and are available in a variety of finishes. These beautiful additions to your home are installed into your current air return opening.

The Design and Maintenance of Air Return Vents

The air return vents are known to be ghastly, disgusting looking things bunged up with years of accumulated dust, as not many folks are sufficiently together enough to get their cooling system, air ventilation and heating, with the vents included, cleaned regularly. And, as vents are usually quite boring, unpleasant, metal things in the initial place, covered with ugly bars, you can’t help but comprehend why they aren’t really given much attention. But in reality, there are a numerous number of options for air return vents.

For sure, the most straightforward solution is just to obain a new coat of paint for your old air return vents.

You must take care when you do this, as if it is not done correctly, you can clog up the system with paint, but in reality, there really isn’t a great deal too it. The majority of vents are in a position where they can be unscrewed easily, either with a socket set, or with a standard screwdriver. If they are in a difficult to reach place, the vents can be got to with a ladder. Then it is just a matter of taking down the air return vent, painting it, being sure to get rid of the excess paint so as not to obstruct airflow, and putting it back in its proper place.

Of course, there are all the fashion options for air return vents that even a Martha Stewart would be able imagine.

They come in wood, metal, and a variety of other designs, occasionally with fancy bas relief or other types of decorations embossed on their surfaces. An option would be to have one custom designed and built by a carpenter, as they are really just a rectangular frame with slats to keep things from falling in. If you yourself are useful around the flat, you might consider making new vents as a craft project. They can be made to match your furniture, artwork, floors, and the layout of your appartment quite flawlessly, and it can really ad something different to your room to have everything including the vents match perfectly. And because they are so straightforward, vents actually don’t require the services of a professional to make or check, or even to install.

If you are looking for vents to replace some of the old painted ones on the walls throughout the house, jump on the internet and see what is available. I ordered HVAC items from the net and I have a rather large selection of HVAC stuff now and I was very happy with the order.

Protect Your Home with FEMA Compliant Flood Vents

It May Be A Lot Easier Than You Think

Would you like to understand the FEMA flood vent regulations that apply to your home? And reduce your flood insurance premiums by a sizable amount?

This document makes the regulations easy to understand, points out the benefits of installing flood vents, and will help you decide what kind of vents to install.

Properly positioned and installed flood vents in your home’s foundation walls will not only help you protect your investment, they can help you save money. And, despite what you may have heard, the regulations governing their type and placement are easy to understand.

These regulations were stipulated by the National Flood Insurance Program (NFIP), a program of the Federal Emergency Management Agency (FEMA).

Requirements: the Basics

1 – Openings must be installed in foundation walls so that water can flow, unimpeded, in and out of the crawl space without damaging the walls’ integrity. The regulation is easy to remember: one square inch of opening in the foundation wall for every square foot of the area of your house. For example, a 2,000-square-foot crawl space would need 2,000 square inches of opening. The number of flood vents you need to install depends on the size and type of vent you buy. (More on that later.)

2 – Each enclosed area must have a minimum of two openings. If there are multiple enclosed areas within the foundation walls, each area must have at least two openings in its exterior walls.

3 – Flood vents must be below flood level to work. The bottom of each opening must be no more than 1 foot above whichever of these is higher: the interior or exterior grade immediately under the opening.

4 – Any screens, grates, grilles, fixed louvers, or other covers or devices you install must not block or hinder the automatic flow of floodwaters into and out of the enclosed area.

Why Are Flood Vents Required?

The purpose of flood vents (also called “flood gates” or “flood ports”) is to reduce structural damage from flooding. These permanent openings accomplish this objective by allowing water to pass into or out of a building’s exterior foundation walls.

Why is that so important? In a flood situation, if the water pressure inside and outside your home can’t equalize rapidly enough, the windows and doors could blow out. In addition, this pressure can compromise the foundation and make your home unsafe to live in. Studies have shown that houses with proper openings survive a flood; homes without such vents collapse.

Who Needs Flood Vents?

According to its website, the NFIP “requires flood vents for residential basements, crawl spaces, garages, and other enclosed structures that are below the Base Flood Elevation (BFE) in Special Flood Hazard Areas.” BFE is the height of the base flood, usually in feet, in relation to the National Geodetic Vertical Datum of 1929 or other datum as specified.

If your home isn’t mortgaged, you aren’t required by FEMA/NFIP regulations to have flood insurance or flood vents. However, flood insurance is advisable to protect your investment. And foundation flood vents are still a wise move to ensure that floodwaters do not structurally damage your home. How Cost Savings Add Up

Properly installed and situated flood vents can pay for themselves very quickly. They allow you to save in two ways. The annual reduction on your flood insurance premiums can be considerable. Secondly, should floodwaters rise to your home, flood vents can reduce the risk of structural damage, which can be very costly to repair.

Which Type of Flood Vent Should You Install?

There are two types of flood vents on the market: non-engineered and engineered. Engineered vents have been designed in such a way that they provide a more efficient flood relief system, and thus fewer vents will need to be installed.

The opening size of the non-engineered flood vent is calculated by multiplying the width times the height of the opening. The opening size of the engineered flood vent is calculated using a mathematical formula that takes into account certain coefficients, net area and opening shapes. This formula calculation must be certified by a professional engineer. The main difference between the two types of flood vents is that fewer of the engineered flood vents are required to meet NFIP requirements. For example, a non-engineered 8″ x 16″ vent is rated at 128 square inches while an engineered 8″ x 16″ is rated at 200 square inches.

Other design and performance criteria for engineered openings are specified by the American Society of Civil Engineers:

1 – Engineered openings are to perform such that the difference between the exterior and interior water levels shall not exceed 1 foot during base flood conditions.

2 – Engineered openings are to be not less than 3 inches in any direction in the plane of the wall. This requirement applies to the hole in the wall, excluding any screen, grate, grille, louvers, or devices that may be placed in or over the opening. The 3-inch opening requirement applies to the hole in the wall; not the space between the grates, grilles or louvers.

In a Nutshell: Numbers to Remember

FEMA’s flood insurance requirements boil down to this:

1 – One square inch of opening in a foundation wall per square foot of house.

2 – Vents must be less than 12 inches above the ground.

3 – Two vents per enclosed area, on different exterior walls.

That’s it. Make sure you have the appropriate flood vents installed — or do it yourself — then call your flood insurance company to get a reduction in your premiums. You’ll also enjoy the peace of mind of knowing that you’re not only compliant, you’re safer.

Using Cast Iron Register Covers, Grilles and Vents In Your Home

When replacing the register covers in your home you want to take two important factors into account – quality and design. Cast iron register covers are a wonderful way to update your existing hardware with high quality and heavy duty material that will stand the test of time while also introducing classic Victorian patterns into any room. While most popular in the late 1890’s through early 1900’s, cast iron register covers are an excellent way to ensure you are updating your home with registers that can withstand large amounts of weight and will not dent or become damage under normal wear and tear.

Heavy duty cast iron registers are available in a wide variety of sizes and designs. Most typically featuring ornate swirl patterns or geometric Victorian designs, these registers will accent any room and can help create or enhance current decorating themes. Depending on where the register is needed (wall or floor) mount holes can be drilled into the register.

When choosing a new register for your home it is important to follow a few simple steps. First, remember that the boot size and overall size of a register are two separate measurements. A boot size refers to the size of the hole in your floor or wall while the overall size refers to the registers overall dimensions. This is important to know because the lip of the register fits into the floor or wall for stability. Second, know the difference between a register and a grill. A register comes with directional louvers while a grill does not. If you do not require louvers you may want to consider a grill as a less expensive option. Finally, ask if the register you have selected is available with mount holes if you are installing it on a wall. While floor mounted registers do not need mount holes (they can be used for added stability if desired) wall mount registers will need to be screw mounted to keep them in place.

Cast iron register covers are readily available online as well as in many home decorating magazines. Search for solid iron construction to ensure maximum heavy duty durability and be sure to ask questions. When you work with cast iron home hardware you can be sure that you are introducing classic designs into your home and high quality. These cast iron register covers are available online through LookInTheAttic & Company and they offer free design assistance and hardware help.